Power Indicator - Toshiba Kira series User Manual

DC IN/Battery indicator
Check the DC IN/Battery indicator to determine the status of the battery
pack and the power status with the AC adaptor connected. The following
indicator conditions should be noted:
Flashing amber
Amber
White
Flashing White
No light
If the battery pack becomes too hot while it is being charged, the charge
will stop and the DC IN/Battery indicator will go out. When the battery
pack's temperature falls to a normal range, charging will resume - this
process will occur regardless of whether the computer's power is on or off.

Power indicator

Check the Power indicator to determine the power status of the computer -
the following indicator conditions should be noted:
White
Flashing amber
No light
User's Manual
The battery charge is low. The AC adaptor must
be connected in order to recharge the battery.
Indicates the AC adaptor is connected and the
battery is charging.
Indicates the AC adaptor is connected and the
battery is fully charged.
Indicates a problem with the computer. Please
disconnect the AC adaptor for several seconds,
and then reconnect the AC adaptor - if it still does
not operate properly, you should contact your
reseller or dealer.
Under any other conditions, the indicator does
not light.
Indicates power is being supplied to the
computer and the computer is turned on.
Indicates that the computer is in Sleep Mode and
that there is sufficient power available (AC
adaptor or battery) to maintain this condition.
Under any other conditions, the indicator does
not light.
3-13