Maintenance; Service & Maintenance Schedule - Glastron Boats User Manual

MAINTENANCE

This section contains a general maintenance schedule and
troubleshooting chart. If you do not fully understand the
information contained within this section of your owner's
manual, or any of the related product service manuals,
contact your Glastron dealer. Glastron Boats recommends
maintenance be performed at an authorized Glastron deal-
er. The following information is of a general nature.
SERVICE & MAINTENANCE SCHEDULE
The following time intervals are intended to be used as a
guide under normal operating conditions. Other operating
conditions may warrant shorter time intervals. Instructions
for performing listed items can be found in either your
owner's manual, installed equipment manuals, or by con-
tacting your Glastron dealer.
Time Interval Description
1 = 48 hours after launch
ITEM
Engine & Drive System
Perform engine and drive unit maintenance as recommended by manufacturer.
Inspect:
Cooling system hoses & clamps
Drive belt tension (all)
Check:
Prop for trueness
Propellers
All thru-hull fittings
2 = 25 hour check during each boating season
3 = Twice during boating season/Every 6 months/Every
100 hours of operation
4 = Beginning of boating season/Every 12 months/Every
200 hours of operation
Maintenance Terminology
Check - to observe for satisfactory conditions, accuracy,
safety or performance.
Inspect - to examine closely, in critical appraisal, while
testing or evaluating components or systems.
Lubricate - to apply a lubricant (oil, grease, etc.) as
specified for reducing friction, heat and wear between
solid surfaces.
TIME INTERVALS
1
4.1
2 3
X X
X
4
4
X
X
X
X
X