Table of Contents
Advertisement
Digit Training Page
Tap Voice Commander Settings and then the Digit Training tab. This function
trains a set of personal voice model to increase accuracy in recognition for users
with heavier accents.
There are 10 sets of built-in 6-digit numbers that you have to recite. The steps
are as follows:
1. Tap
Record button. When you hear a beep, start reciting the displayed
numbers.
2. After reciting, the system plays the numbers you just recited so that you can
check if it is correct.
3. If correct, please tap Yes and the system prompts you to continue reciting the
next set of numbers for recording.
4. If it is necessary to recite these numbers again, tap No and then recite again.
5. If you are not satisfied with the sound recorded before, tap
button and the system will delete all recorded sounds. Please record again.
6. After recording 10 sets of numbers, the system will tell you that the voice
model is already built.
13-12
: Voice tag is built.
: Current digit to be recorded.
Check "Use adapted model" to
use the model tailor made for you
with better recognition ability.
Record button: Start
recording the assigned digit.
Remove All button: Delete
all voice tags.
Remove All
Advertisement
Table of Contents
