Related Manuals for AvidHiFi Naim Slide
Summary of Contents for AvidHiFi Naim Slide
- Page 1 V 1.1E INSTRUCTION MANUAL NAIM SLIDE Warranty Register your product at: www.avidhifi.co.uk/register.htm...
- Page 2 Table of Contents Section Page Preface Introduction Packaging Parts Checklist Servicing Cleaning Set-up Instructions and User Guidance Warranty...
- Page 3 As a result of a close relationship between the two companies, the Naim Slide was designed to allow owners of Avid turntables to use the ARO pick up arm and make accurate adjustments during installation, so any cartridge combination can be successfully used with the correct overhang.
- Page 4 Remove the cable clamp from the Naim arm cable. This is not required and only impedes the suspension. Attach the arm cable to the underside of the Naim Slide assembly, using the 4 x M2 bolts supplied. DO NOT USE THE SELF-TAPPING SCREWS SUPPLIED WITH THE ARM.
- Page 5 Fit the whole assembly to the subchassis using the M3 x 20 bolts, M3 washers and M3 nuts supplied. Do not tighten down and keep loose. Fit the arm wand making sure the arm connecting cable is not caught. Fit into the receiving socket and check movement is not restricted.
- Page 6 Act 1979) the statutory rights of the purchaser are not affected by this warranty. • Products are sold on the basis of specifications applicable at the time of sale. AVID sh have no obligation to modify or to update products once sold.
Need help?
Do you have a question about the Naim Slide and is the answer not in the manual?
Questions and answers