Page 1
INGENIUM TURNTABLE RANGE Extended 5-Year Warranty AVID is pleased to extend the normal warranty duration to 5-Years from the date of original shipping. This warranty is transferable in the unlikely event that you would sell this unit onto another party. Register your product at;...
Table of Contents Section Page Preface Introduction Warnings Packaging Parts Checklist Set-up Instructions Servicing Cleaning Warranty-Terms and Conditions Specifications WARNING YOU MUST ALWAYS REMOVE THE PLATTER AND BEARING AND USE THE TRANSIT PACKAGING WHEN YOU TRANSPORT YOUR TURNTABLE OR YOU MAY DAMAGE THE BEARING DON’T PUT IT ON THE BACK SEAT OF YOUR CAR—YOU’LL BREAK IT...
PREFACE Please take time to read this Instruction Manual before unpacking your Ingenium Turntable. This product is a precision-engineered machine and whilst damage is unlikely with careful handling, the sheer mass of some of the parts could lead to damage of less robust parts within its design. Some of these parts have been excluded from the warranty.
SET UP INSTRUCTIONS THE SUPPLIED PACKAGING IS VITAL FOR PROTECTION AND SHIPPING. IT SHOULD BE RETAINED AND REPLACEMENT PACKAGING IS COSTLY. • ON OPENING THE BOX AFTER REMOVING THE TOP LAYER YOU WILL SEE THE TURNTABLE PARTS. • CAREFULLY REMOVE THE PARTS FROM THE PACKAGING.
The only two things that will need attention will be: 1. Drive Belt, which we suggest be replaced annually. 2. Main Bearing Lubrication. This should be done by AVID after approximately 10 years service. CLEANING To maintain the visual appearance, occasionally dust the surfaces with a normal duster - no need for any sprays or polishes.
AVID agent, which ever comes first, extending to five years subject to the product owner having submitted the Registration form (www.avidhifi.co.uk/register.htm).
54 - 74 x 36 x 22cm (depending upon model) SHIPPING WEIGHT 8.0 - 14.0Kg (depending upon model) AVID reserves the right to improve or change its products without notice at any time. EC Declaration of Conformity 22 December 2012...
Need help?
Do you have a question about the Ingenium Series and is the answer not in the manual?
Questions and answers