Advertisement

Quick Links

VOLVERE
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VOLVERE and is the answer not in the manual?

Questions and answers

Summary of Contents for AvidHiFi VOLVERE

  • Page 1 VOLVERE USER MANUAL...
  • Page 3: Table Of Contents

    AVID is pleased to extend the normal warranty duration to 5-Years from the date of original factory shipping. This warranty is transferable in the unlikely event that you would sell this unit onto another party. Register your product at; www.avidhifi.com/register...
  • Page 4: Preface

    Introduction The Volvere is an audio turntable manufactured to extreme limits of precision, design and detail. There are many unique and novel features in this product and its design allows you to install the pick-up arm and cartridge of your choice.
  • Page 5: Set-Up Instructions

    Set Up Instructions The supplied packaging is vital for protection and shipping. It should be retained as replacement packaging is costly. The packaging is layered with each part having a suitable compartment. Make sure it is fitted correctly to avoid damage. LAYER 1: Clamp, Bearing and Power Supply First, remove the Power Supply to prevent it inadvertently dropping and...
  • Page 6 All our suspended turntables offer the opportunity to set up the arm/ cartridge off the suspension. This gives more stability and accuracy. Place the subchassis on a suitable surface and install the pick up arm and cartridge if not already fitted. CLEAN THE TOP OF THE SPINDLE WITH CLEAN TISSUE PAPER Place the clean bearing ball into the top of the spindle.
  • Page 7 Carefully fit the subchassis to the main chassis, locating the subchassis legs into the suspension adjusters in the middle of each of the springs. Take care that the subchassis does not tip off due to the weight of the fitted tonearm. You can apply some downwards pressure to the subchassis making sure the legs are fully inserted.
  • Page 8 With a gentle touch, lift the platter edge to expose the motor pulley. Rotate the platter to engage the belts with the grooves of the drive pulley. Using your finger, hold the drive belts against the underside rim of the platter, and then remove the fitting pin. Finally, let go of the drive belts, and they will be secured in place.
  • Page 9: Power Supply

    Power Supply The Volvere Power Supply is purpose designed and individually calibrated to the powerful motors used. You should have no reason to open the power supply and tamper with anything within. Doing so invalidates any warranty, reduces sound quality and will possibly cause damage. It is important to allow adequate ventilation. The Mains input socket for all units is an IEC type socket on the rear panel and you should use the cable provided or a suitable alternative.
  • Page 10: Servicing

    EC DECLARATION OF CONFORMITY We the Manufacturer, AVID HIFI Limited Bicton Ind. Park, Kimbolton, Cambridgeshire. PE28 0LW (UK) TEL: +44 (0)1480 869900 / Email: info@avidhifi.co.uk / Web: www.avidhifi.com Acknowledge our sole responsibility, that the product: KIND OF EQUIPMENT: Turntable/Record Player...
  • Page 11: Warranty-Terms And Conditions

    AVID agent, which ever comes first, extending to five years subject to the product owner having submitted the Registration form www.avidhifi.com/register Also the following conditions being observed.
  • Page 12 AVID HIFI Ltd Bicton Industrial Park, Kimbolton, Huntingdon, Cambridgeshire. PE28 0LW ENGLAND Tel: +44(0)1480 869 900 — Website: www.avidhifi.com - Email: info@avidhifi.co.uk V230308...

Table of Contents