Philips simplyFLO User Manual page 6

Warnings (continued)
• Repairs and adjustments must be performed by Philips Respironics
authorized service personnel only� Unauthorized service could cause
injury, invalidate the warranty, or result in costly damage�
• Periodically inspect electrical cords, cables, and the power supply for
damage or signs of wear� Discontinue use and replace if damaged�
• To avoid electric shock, unplug the device before cleaning. DO NOT
immerse the device in any fluids�
• Your home care provider is responsible for performing appropriate
preventive maintenance at the intervals recommended by Philips
Respironics�
• For proper operation, your device requires unobstructed ventilation.
Always make sure any openings in the case are not obstructed by
items which may impede ventilation� Do not place the device in a
small closed space (such as a closet)� The device should not be used
adjacent to or stacked with other equipment. For more information,
contact your home care provider�
• Do not use an extension cord.
• Device operation above or outside of the voltage, temperature,
humidity and/or altitude values specified may decrease oxygen
concentration levels�
• Never drop or insert any object into any opening.
• Be aware that the electrical cord and/or tubing could present a
tripping or strangulation hazard�
• Use only power cords supplied by Philips Respironics for this device.
Use of power cords not supplied by Philips Respironics may cause
overheating or damage to the device and may result in increased
emissions or decreased immunity of the equipment or system�
• The user should be aware that there is no backup power.
• Medical Electrical Equipment needs special precautions regarding
EMC and needs to be installed and put into service according to the
EMC information provided in this manual�
• Place the device in a location so as to avoid pollutants and fumes.
• Portable and Mobile RF Communications Equipment can affect
Medical Electrical Equipment� See the EMC section of this manual
for distances to observe between RF Generators and the simplyFLO
device to avoid interference�
simplyFLO User Manual
3