Mackie 56-input, 72 channel, fully automated digital audio mixing console Quick Start Manual page 14

Mackies 56-input, 72 channel, fully automated digital audio mixing console
Table of Contents

Advertisement

• Select Fader Bank 2 (TAPE 25–48).
MASTERS
1-24
MIC/LINE
(TRACK)
49-72
EFFECTS
BANK SELECT
• Turn the faders down on channels 27 and
28. The TRIM control at the top of the
channel strip has no effect when Fader
Bank 2 is selected.
• Start playing the keyboard and you should
see the meter on channel 27 indicating the
signal.
• Slowly increase the faders on channels 27
and 28 to their unity position. You should
hear the signal in the speakers. If it's too
loud, turn the SPEAKER LEVEL V-Pot
down in the Control Room Section.
You can add effects to the monitor signal,
without affecting the signal being recorded
onto tape.
• Select AUX 1 in the V-Pot Select Section.
1-24
LEVEL TO TAPE
AUX 1
AUX 3
AUX 5
AUX 7
• Press the PLUG-INS button in the Fat
Channel Section.
SUPER CD ENCODING
SELECT
SELECT
PREVIOUS
LOW
LOW MID
ON
SETUP
EQ
GATE
COMPRESSOR
• Rotate the first V-Pot in the Fat Channel
SHIFT
25-48
TAPE IN
(MONITOR)
SUPER CD ENCODING
• Adjust the V-Pots on channels 27 and 28 to
• Adjust the Master V-Pot to set the overall
• Select Fader Bank 3 (EFFECTS 49–72). In
1-48
DIGITAL TRIM
AUX 2
AUX 4
AUX 6
AUX 8
SELECT
SELECT
HELP
HI MID
HI
NEXT
MEMORY A
MEMORY B
PLUG-INS
LOAD PATCH
SAVE PATCH
Section to select the effect you want to use
with Aux 1. Press the NEXT button to scroll
through the various parameters of the effect
and adjust accordingly.
D8B
56 INPUT / 72 CHANNEL DIGITAL MIXER
A u x
1
R e v e r b
SELECT
SELECT
PREVIOUS
LOW
LOW MID
ON
SETUP
EQ
GATE
COMPRESSOR
set their aux send levels.
aux send level to the internal FX card.
MASTER
PAN
SOLO
this bank, faders 1 and 2 adjust the effects
return level of Aux 1. To hear the effects,
bring up faders 1 and 2. Make sure they are
assigned to the L-R bus.
MASTERS
1-24
MIC/LINE
TAPE IN
(TRACK)
(MONITOR)
49-72
EFFECTS
BANK SELECT
Tutorial Hookup — Let's Get It Working
( S T A N D A R D
E F F E C T S ) >
V e r s i o n
1 . 0
SELECT
SELECT
HI MID
HI
MEMORY A
MEMORY B
PLUG-INS
LOAD PATCH
SAVE PATCH
SHIFT
25-48
HELP
NEXT
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digital 8-bus

Table of Contents