After Starting; Engine Block Heater - If Equipped - Dodge 2010 Avenger Owner's Manual

Dodge 2010 avenger
Hide thumbs Also See for 2010 Avenger:
Table of Contents

Advertisement

240 STARTING AND OPERATING
CAUTION!
To prevent damage to the starter, wait 10 to 15 sec-
onds before trying again.

After Starting

The idle speed will automatically decrease as the engine
warms up.
ENGINE BLOCK HEATER — IF EQUIPPED
The engine block heater warms the engine, and permits
quicker starts in cold weather. Connect the cord to a
standard 110-115 Volt AC electrical outlet with a grounded,
three-wire extension cord.
The engine block heater cord is routed under the hood on
the passenger side of the vehicle near the right head lamp
assembly. It is located between the front grille and the
radiator, but underneath the black upper seal.
WARNING!
Remember to disconnect the cord before driving.
Damage to the 110-115 Volt electrical cord could cause
electrocution.

Advertisement

Table of Contents
loading

Table of Contents