1998 Ranger Workshop Manual
43. Connect the canister purge hose and locator to the accelerator control bracket.
44. Install the accelerator control splash shield (9E766).
45. Raise and support the vehicle. Refer to
46. Drain engine oil.
47. Lower the vehicle.
48. Install the air cleaner outlet tube.
49. Connect the crankcase ventilation hose.
50. Connect the electrical connector to the mass air flow (MAF) sensor.
51. Connect the electrical connector to the intake air temperature (IAT) sensor.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSWL/~MUS~LEN/21...
Section
100-02.
16
11/21/2009