1998 Ranger Workshop Manual
30. Connect the radio noise suppressor.
31. Connect the coil connector.
32. Connect the lower radiator bypass hose to the thermostat housing.
33. Connect the heater hoses to the intake manifold (9424) and the thermostat housing.
34. Install the accessory drive belt on the generator pulley (10344).
1. Loosen tensioner.
2. Install belt.
35. Install the upper radiator hose (8260).
36. Install the exhaust manifold tube (9D475) to the EGR valve.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSWL/~MUS~LEN/21...
16
11/21/2009