1998 Ranger Workshop Manual
37. Connect the vacuum hoses to the differential pressure feedback EGR system (9J433).
38. Connect the electrical connector to the differential pressure feedback EGR system.
39. Connect the electrical connector to the throttle position (TP) sensor (9B989).
40. Connect the electrical connector to the idle air control (IAC) valve (9F715).
41. Connect the throttle cable and speed control cable (if equipped) to the throttle bracket.
42. Install the bracket to the throttle body.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSWL/~MUS~LEN/21...
16
11/21/2009