2.5.2
Configuring the user name and password
You may change your user name and password from the ASMC7 utility.
To change the user name and password:
1.
Follow steps 1-5 on page 2-11.
When the C:> prompt appears, type ASMC7 -user_name xxxxx, then
2.
press <Enter> to change the user name.
C:\>ASMC7 -user_name super
Detect MotherBoard
Detect KCS Interface
Change User Name to super
C:\>
Type ASMC7 -user_password xxxxxxxx, then press <Enter> to change
3.
the password.
4.
Restart the remote server, enter the BIOS setup, then boot from the hard disk
drive.
2-16
-> (Z9PE Series)
Chapter 2: Installation