Before You Proceed; Hardware Installation - Asus ASMB7-iKVM User Manual

2.1

Before you proceed

Take note of the following precautions before you install the server management
board to the remote server system.
•
•
•
•
•
2.2

Hardware installation

To install the server management board:
1. Locate the Baseboard Management
Card header on the motherboard.
2. Orient and press the Management
Card in place.
The motherboard illustration is for reference only. The motherboard layout and
appearance may vary depending on the model, but the installation steps remain
the same.
2-2
Unplug the server system power cord from the wall socket before touching
any component.
Use a grounded wrist strap or touch a safely grounded object or to
a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity.
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
Before you install or remove any component, ensure that the power supply
is switched off or the power cord is detached from the power supply. Failure
to do so may cause severe damage to the motherboard, peripherals, and/or
components.
Chapter 2: Installation