Override Calls - Toshiba Strata AirLink User Manual

Standard Features

Override Calls

To set a MW indication at another telephone
i
If the called
telephone is busy or
does not answer,
press
To cancel the MW indication at another telephone
i
Press
called telephone
number +
Override Calls
Note
The available override features are:
Busy Override – sends muted ring tones to a busy station to indicate that a call
Ä
is waiting. The muted ring is programmed for each station as two muted rings
only or continued muted rings until the call is answered. The muted ring can be
sent to the telephone speaker or to the telephone handset/headset and speaker.
DND Override – sends a tone to an idle or busy station
Ä
in the DND mode to indicate that a call is coming in.
Your handset can also be programmed to block DND
Override from other telephones. The handset LCD
shows that the called station,
Executive Override – enters an established
Ä
conversation. Your handset can also be programmed to
block Executive Override. The Privacy on Line feature
does not block this feature.
98
The MW lamp turns on.
+ .
: ( 1 '
+ the Your hear busy tone if the called telephone is busy.
& $ / /
If the telephone is idle, you hear repetitive ringing
: : + ( 1 ' . or a single tone.
The stations indicated in the LCDs shown below and on the following pages
( 203 , 204 , 205 , and 210 ) are examples, not handset defaults.
210 , is in the DND mode.
Strata AirLink Integrated Wireless Handset 5/99
N O . 2 0 4 I N T
2 1 0 D N D
1 2 : 1 5