Call Forward-External - Toshiba Strata AirLink User Manual

Call Forward–External
1. Store the destination
number at Station SD
location code 49.
2. Press
& $ / /
To cancel a CF–External
i
Press
& $ / /
To change a remote forwarding destination number
If Call Forward-External mode is set at your station, you can change the forwarding
destination from a telephone outside of the system.
1. Call into the Strata
DK system over a CO
line programmed for
DISA.
2. After you get dial
tone, press
your [PDN].
3. Enter the Remote
CF–External security
code.
Strata AirLink Integrated Wireless Handset 5/99
Notes
Only perform Step 1 the first time CF-External
is set or when you change the destination. It is
not necessary to store the destination each time;
it remains in system memory.
The LCR access code "9" cannot be used.
+ . Incoming calls forward to the destination stored at
&9: 3
Station Speed Dial Location 49.
+ + .
&9: 3 ( 1 '
You hear ringback tone signal, then internal dial
tone for 10 seconds. Try again if you hear busy tone.
Note See the System Administrator for DISA
telephone numbers.
You hear a confirmation tone.
+
&9: 3
If a number is not dialed, the system automatically
makes the DISA CO line ring as a normal incoming
call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
You hear a confirmation tone. See the System
Administrator for the security code that is assigned
to your handset in system programming.
Standard Features
Call Forward
85