Construction Process Overview; Metal Core Structure - Acunto Mario Classico 2 Installation, Use And Maintenance Manual

CONSTRUCTION PROCESS OVERVIEW

The pizza oven type "CLASSICO" is a wood-burning handcrafted pizza oven produced by
our company. It is made by a core structure of steel metal and then covered as follows:
- The internal room in completely covered by refractory material such as clay stones for
the hob where the pizza is placed and cooked and refractory bricks for the dome.
- The external part (outside the core structure) is made with insulation material composed
by a mixture of soft clay and cement.
We confirm that the CLASSICO ovens are handmade and built according to the
Neapolitan craftsman tradition.
A brief description of the process and specifications are provided as follows:
Stage 1
As a first step, a metal steel core structure is build using steel and soldering the different
parts with a standard common solder.
Picture 5: Metal core structure
Stage 2
Once the structure is ready, the base is filled by clay material mixed with cement (such
layer is approximately 30 cm high). On this base, the hob is put on. The hob (the surface
on top of which the pizza will be cooked) is made by typical clay material.
____________________________________________________________________________________________________________
Ditta Mario Acunto - Forni professionali per pizzerie
8
Via S. Maria ai Monti 132, 80141, Napoli, Italia
Tel/Fax: +39 081 599 28 93 - Partita I.V.A. : 07337180637 - Email: info@acuntoforni.it - Web: www.acuntoforni.it