Page 2
• To m To m PRO W hat’s in the • Easy Click m ount • U SB cable • U SB car charger • Installation poster...
Page 3
A nsw er the questions by tapping the screen. W hen you first start your To m To m PRO navigation device, the device may need a fe w minutes to determine your GPS position and sho w your current position on the map. In future, your position will be found much faster, usually within a fe w seconds.
Page 4
4. W hen pro m pted, connect the m ount for your device to your co m puter using the supplied cable. Then place your device in the m ount and switch your device on.
Page 5
N ever leave your To m To m PRO or accessories on vie w w hen you leave the car as they may beco m e an easy target for thieves.
Page 6
• Sho w essential m enu buttons while driving • Sho w safety re minders • W arn w hen driving faster than allo w ed You can also drive m ore safely by using voice co m mands to control your To m To m PRO.
Page 7
FLE ET WEBFLEET (9). Connect your To m To m PRO device to your To m To m LINK to fully enjoy the benefits of Connected Navigation. W hen you first switch on your PRO device, you are asked to connect it with the LINK installed in your vehicle.
Page 8
If you have properly connected the tw o devices, you receive a w elco m e m essage fro m W EBFLEET confirming the activation. In future the connection is established auto matically. To check the connection status betw een the tw o devices, tap in the m enu on your navigation device, then tap...
Page 9
A ctivate your PRO to fully enjoy the benefits of Connected Navigation. W hen you first switch on your PRO device, you are asked to activate it. You can do this im m ediately or at a later tim e.
Page 11
To plan a route on your To m To m PRO, do the follo wing : 1. Tap the screen to open the Main m enu. 2. Tap 3.
Page 12
5. Enter the streetnam e. • Streets with similar nam es are sho w n in the list w hile you type. • W hen the correct streetnam e appears in the list, tap the nam e to select the destination.
Page 13
• For m ore information about the route, tap • To plan a different route, tap Your To m To m PRO starts to guide you to your destination, using spoken instructions and onscreen directions. The route su m mary sho ws an overvie w of your route, the re maining distance to your destination and the re maining estimated journey tim e.
Page 14
. Then select a button to use for this destination and answ er the questions about the destination. You can set your To m To m PRO to ask if you w ant to plan a route to one of your frequently visited destinations every tim e the device starts.
Page 15
Otherwise, tap Every tim e your To m To m PRO starts, you are asked if you w ant to plan a route. If you tap , you are sho w n the Main M enu.
Page 16
W hen you tap , you can set your destination in many w ays, not just by entering the address. The other options are listed belo w : Tap this button to use To m To m Local Search withTo m To m Places to help you find shops and businesses in and around your current location.
Page 17
6. Choose the date and tim e that you will make the journey you are planning. Your PRO uses IQ Routes to w ork out the best possible route at that tim e. This is useful to see ho w long a journey takes at different tim es of the day or on different days of the w eek.
Page 18
Note : This button is only shown if your device has either an HD Traffic subscription or an RDS-TMC Receiver connected. Traffic information is not available in all countries or regions. For more information about TomTom traffic information services, go to tomtom.com/services .
Page 19
Voice control Instead of tapping the screen to control your To m To m PRO, you can use your voice to control your PRO. For exam ple, to increase the volu m e on your PRO, you can say, "Increase volu m e."...
Page 20
3. Say the nam e of the to w n. Your PRO sho ws a list of to w ns w hich sound similar to w hat you said and tells you w hich to w n is at the top of the list.
Page 21
If the nu m ber is sho w n incorrectly then say, "Back" or "N o" or tap the Backspace key and repeat the nu m ber. : If you say, "Back" w hen there are no nu m bers on the screen, your PRO will return you to the previous screen.
Page 22
- to select the point w here tw o streets m eet. • Your PRO recognises places and streetna m es when they are spoken in the local language using local pronunciation. • Spoken address entry is not possible for postcodes w hich must be entered using the keyboard.
Page 23
Driving Vie w W hen your To m To m PRO device starts for the first tim e, you are sho w n the Driving Vie w along with detailed information about your current position. Tap the centre of the screen at any tim e to open the Main M enu.
Page 24
Your To m To m PRO helps you im prove your driving behaviour. The Driving Vie w sho ws real-tim e alerts to re mind you to drive in a safer and m ore fuel-efficient w ay.
Page 25
* Installed TomTom LINK required. ** Installed TomTom ecoPLUS and LINK required. The follo wing sy m bols are sho w n in the Driving Vie w : M obile phone not connected - this sy m bol is sho w n w hen the selected m obile phone is not connected to your device.
Page 26
Your To m To m PRO helps you im prove the safety and efficiency of your driving behaviour. A ctive driver fee d- back It also helps you to save m oney and drive in a m ore environ m entally responsible w ay.
Page 27
Note : Lane guidance is not available for all junctions or in all countries. Your To m To m PRO helps you prepare for m otorw ay exits and junctions by sho wing the correct driving lane for your planned route.
Page 28
: If no lane guidance is sho w n in the status bar and all lanes are highlighted, you can use any lane.
Page 29
- tap this button to vie w the connectioin status betw een you and the office. • - tap this button to change the vehicle in w hich you are using your PRO. • - tap this button to configure the source for the GPS signal, change the...
Page 30
The office can send service orders, delivery orders and pick up orders. They are stored on O rders your To m To m PRO. You can read and deal with the m at any tim e by tapping in the m enu.
Page 31
2. Tap 3. Tap 4. Select an order fro m the list. To let the PRO device read aloud the order tap then tap 5. To w ork on this order tap . To reject the order tap , then tap You can enter a reason for the rejection.
Page 32
1. To switch to another order, select the order fro m the list of orders. 2. You are asked to suspend the current order and to start w orking on the ne w one. You can continue w orking on the suspended order at any tim e. To do this, select the suspended order fro m the list and tap 1.
Page 33
In addition to orders with a single destination you can also receive Itinerary orders w hich include a predefined route with multiple w aypoints on your To m To m PRO device. This chapter explains ho w to skip w aypoints of an Itinerary order.
Page 34
You can access the list of w aypoints of your itinerary order and skip single w aypoints. To navigate using a specific w aypoint do the follo wing : 1. Tap the W aypoint icon in the Driving Vie w to sho w the list of w aypoints and the departure and destination points.
Page 35
3. Tap the map to select a w aypoint. The location you tapped on the map is flagged. : This location does not have to be exactly on one of the w aypoints already on your itinerary. 4. Tap the button in the street nam e balloon. 5.
Page 36
8. Tap Navigation to the selected w aypoint begins. If you w ant to switch notifications w hen passing waypoints on or off, do the follo wing: 1. Tap the screen to bring up the Main M enu. 2. Tap 3.
Page 37
The office can send text m essages to you. They are stored on your To m To m PRO. You M es- sages can read the m at any tim e by tapping in the m enu. These sy m bols sho w the type and status of ite ms in your m essages list and in your list of...
Page 39
Orders can contain a contact nam e and a telephone nu m ber. You can call this nu m ber Call contact fro m your To m To m PRO. Note : To use the Call contact feature you need a Bluetooth® mobile phone that is compatible with your PRO device.
Page 41
Report to of- fice To send a text m essage to the office, do the follo wing. 1. Tap in the m enu. 2. Tap 3. Enter your text (see belo w). 4. To send your co m plete m essage to the office, tap Enter your m essage using the keyboard and the follo wing buttons: Tap this button to enter upper-case letters.
Page 42
Tap this button to switch back to the alphabetic keyboard. Tap this button to delete single characters. Pre-defined m essages m ust be defined by the office. You can also add information to a predefined m essage. 1. Tap in the m enu.
Page 43
PIN code. Note : Using TomTom WEBFLEET, the office can select that you have to enter your PIN code each time you switch on your TomTom PRO. 1. Tap the screen to bring up the main m enu.
Page 44
Your PIN code is no w stored and used for all reports until you change it.
Page 45
. To resu m e w ork after a break, tap again. To report the end of your w ork tap Note : Either Report work time or Change logbook mode is available. These are activated by the office using TomTom WEBFLEET.
Page 46
W hen you turn on your To m To m PRO device, you may be asked to report that you are starting w ork or finishing a break. This happens if the last status you reported before switching off w as...
Page 47
You can generate a driver’s logbook with your To m To m PRO. To use this functionality you Change log- book m ode need to adjust the odo m eter first. You can do this by tapping in the logbook. See (62).
Page 48
Tap this button w hile driving on a planned route, to avoid a roadblock or traffic congestion on the road ahead. Your PRO will suggest a ne w route w hich avoids the roads on your current route for the selected distance.
Page 49
Tap this button to avoid traffic delays on a planned route. It is not always possible to avoid all traffic delays. Your PRO will check for traffic delays on your route and calculate the best route to avoid all or m ost of the delays.
Page 50
Note : LIVE services are only available in designated countries. In order to benefit from LIVE services, the respective WEBFLEET subscription is needed. For more information on available services in your country, go to business.tomtom.com/liveservices . 3. Marker Markers point to your current location (blue), your ho m e location (yello w) and your destination (red).
Page 51
Note : LIVE services are only available in designated countries. In order to benefit from LIVE services, the respective WEBFLEET subscription is needed. For more information on available services in your country, go to business.tomtom.com/liveservices . • - select this option to sho w street and city nam es on the map.
Page 52
To m To m Map Share co m m unity. Tap this button to call the location at the cursor position. This button is only available if your PRO has the phone nu m ber for the location.
Page 53
5. Select the category of Map Share corrections you w ant to use for your maps. 6. Tap W hen you connect your PRO to your co m puter, M yTo m To m do w nloads any ne w corrections and sends your corrections to the Map Share co m m unity.
Page 54
To do w nload the latest ne w map corrections and to send your o w n corrections, connect your To m To m PRO to M yTo m To m. If ne w map corrections are available for your maps, then your PRO will auto matically do w nload the corrections and update your maps.
Page 55
: For safety reasons, do not enter the full details of a map correction while you are driving. Mark the location of the map error instead and enter the full details later. To sho w the report button in the Driving vie w, do the follo wing: 1.
Page 56
Tap this button to block or unblock a street. You can block or unblock the street in one or both directions. For exam ple, to correct a street near to your current location, do the follo wing : 1. Tap 2.
Page 57
Tap this button to change the nam e of a street on your map. For exam ple, to renam e a street near to your current location: 1. Tap 2. Tap 3. Select the street or section of a street you w ant to correct by tapping it on the map.
Page 58
These corrections are not im m ediately applied to your map. Your To m To m PRO sends a special report to To m To m Map Share. You can report missing streets, errors in m otorway entrances and exits and missing roundabouts.
Page 59
To select a different voice on your To m To m PRO, tap in the settings m enu. Then and select the required voice. You can change the volu m e on your To m To m PRO in several w ays. • In the Driving vie w.
Page 60
Tap to listen to the ne w volu m e level. To set your To m To m PRO to auto matically adjust the volu m e, do the follo wing: 1. Tap in the M ain m enu.
Page 61
: • If you are using your PRO together with a LINK, choose to use the GPS signal either fro m your To m To m navigation device or fro m your LINK.
Page 62
W hen you use the logbook you need to synchronise the odo m eter on your To m To m PRO A djust odo m- eter with your vehicle’s odo m eter. 1. Tap the screen to bring up the main m enu.
Page 63
1. Tap the screen to bring up the main m enu. 2. Tap 3. Tap 4. Select the LINK you w ant to connect your PRO device to fro m the list of Bluetooth devices. Enter the activation code fro m your W EBFLEET contract confirmation and the licence plate nu m ber and choose the applicable vehicle type (see (7)).
Page 64
To see the connection status of your PRO, your LINK and W EBFLEET, do the follo wing: Con- nec- tion status 1. Tap the screen to bring up the main m enu. 2. Tap 3. Tap Here you have a brief overvie w of the connection status: •...
Page 66
W ORKsmart functionality. M essages you send to the office are only sent w hen your PRO and the LINK are connected. W hen there is no connection betw een the tw o devices, the m essages are stored on your PRO.
Page 67
S et- tings You can change the w ay your To m To m PRO looks and behaves. M ost of the settings on your device can be accessed by tapping in the Main M enu. Tap this button to reduce the brightness of the screen and display the map in darker colours.
Page 68
to navigate to e m ergency services centres and other specialist services and contact the m by phone. For m ore information, see Tap this button to manage your favourites or change your ho m e location as described belo w. Tap this button to add, renam e or delete Favourites.
Page 69
Tap this button to set the type of spoken directions and other route instructions your To m To m PRO will read aloud. Tap this button to set the volu m e level for your To m To m PRO. M ove the slider to change the volu m e.
Page 70
Tap this button to set w hat happens w hen your To m To m PRO starts. Tap this button to select the tim e format. As soon as you have a GPS fix, the tim e will be set auto matically. If you don’t have a GPS fix, you can choose to set the tim e manually.
Page 71
Map Share co m m unity. You can set your PRO to let you kno w w hen you are near to selected POI locations. In this way, you could for exam ple, set the device to let you kno w w hen you are approaching a petrol station.
Page 72
Set w hether you w ant your To m To m PRO to replan the current route if a faster route is found w hile you are driving. This is useful if traffic builds up or clears, further ahead on your route.
Page 73
• - the distance to your destination. • - your PRO sho ws ho w late or early you will arrive, co m pared with your preferred arrival tim e that w as set w hen you planned the route.
Page 74
You can choose fro m a wide range of languages. W hen you change the language, you are also given the opportunity to change the voice. Tap this button to set the units used on your PRO for features such as route planning and w eather reports.
Page 75
Tap this button to find technical information on your To m To m PRO such as the device serial num ber, application version and the map version. You can also vie w the current status for GPS reception. Tap this button to select the follo wing advanced settings: •...
Page 76
Tap this button to delete all your personal settings and restore the standard factory settings to your To m To m PRO. This is not a softw are update and will not affect the version of the software application installed on your PRO.
Page 77
Points of Inter- Points of Interest or POIs are useful places on the map. Here are so m e exam ples: • Restaurants • Hotels • M useu ms • Parking garages • Petrol stations : To report incorrect or missing information about an existing Point of Interest included with your map, use the Map Share service to share your corrections with the Map Share co m munity.
Page 78
Tap this button to set your Ho m e location as a POI. This is useful if you decide to change your Ho m e location, but first w ant to create a POI using the current Ho m e address. Tap this button to create a POI fro m a Favourite.
Page 79
3. Tap : The last POI you vie w ed on your PRO is also sho w n in the m enu. 4. Enter the nam e of the to w n or city and select it w hen it is sho w n in the list.
Page 80
Point of Interest locations are sho w n on the map as sy m bols. Many of the POIs on your To m To m PRO include phone nu m bers. This m eans you can use your PRO to call the POI and plan a route to the location of the POI.
Page 81
Map Share co m m unity. You can set your PRO to let you kno w w hen you are near to selected POI locations. In this w ay, you could for exam ple, set the device to let you kno w you w hen you are approaching a petrol station.
Page 82
5. Select a centre fro m the list, the nearest is sho w n at the top of the list. Your PRO sho ws your position on the map along with a description of the location. This helps you explain w here you are w hile making a call.
Page 83
Tap this button to navigate your way on foot to a service centre. Tap this button to see your current location on the map. You can then and select the type of service you w ant to contact and tell the m your exact location. Tap this button to read a selection of guides including a First Aid guide.
Page 84
You only need to do this once and your To m To m PRO will re m e m ber your phone. • M ake sure that you switch on Bluetooth® on your phone.
Page 85
W hen so m eone calls you, the caller’s nam e and phone nu m ber are sho w n. Tap the screen to accept or reject the call. You can set your To m To m PRO to auto matically answ er inco ming phone calls. To set auto matic answ ering, tap...
Page 86
Tap this button to change your Ho m e phone nu m ber. Tap this button to disable Bluetooth on your To m To m PRO . Tap this button to select information you w ant to delete. You can delete the list of recent callers and the list of recently dialled nu m bers.
Page 87
Favour- ites Favourites provide an easy w ay to select a location without the need to enter the address. They do not need to be favourite places, they can sim ply be seen as a collection of useful addresses. To create a Favourite, do the follo wing: 1.
Page 88
Tap this button to select your last recorded position as your destination. 7. Your PRO suggests a nam e for your ne w Favourite. To enter a ne w nam e, there is no need to delete the suggested nam e, you just start typing.
Page 89
Your PRO calculates the route for you. 6. W hen the route is calculated, tap Your PRO will im m ediately start guiding you to your destination with spoken instructions and visual instructions on the screen. To change the nam e of a Favourite, do the follo wing: 1.
Page 90
LIVE Servic- There are a range of LIVE Services available for your To m To m PRO. These services are subscription-based and currently include the follo wing : • To m To m HD Traffic • Speed Cam eras • W eather •...
Page 91
• Toll road ca m era locations. • Traffic light ca m era locations. The follo wing services are also available on your To m To m PRO : The W eather service gives you five-day w eather reports for any location on your map.
Page 92
Your To m To m PRO regularly receives information about the changing traffic conditions. If traffic jams or other incidents are found on your current route, your PRO will offer to replan your route to try and avoid any delays.
Page 93
Stationary traffic or road closure. Your PRO regularly looks for a faster route to your destination. If the traffic situation changes and a faster route is found, your PRO will offer to replan your journey so you can use the faster route.
Page 94
1. Tap the Traffic bar in the Driving Vie w. 2. Tap Your PRO plans the quickest route to your destination. The ne w route may include traffic delays and may re main the sam e as the original route.
Page 95
The first tim e you use , you must set your traffic ho m e and w ork locations. 1. Tap the traffic sidebar to open the Traffic m enu. 2. Tap 3. Set your ho m e location and your w ork location. If you have already set the locations and w ant to change the m, tap You can no w use the buttons.
Page 96
Note: You can also access the Show traffic on route screen by tapping the traffic area of the LIVE Route summary tab. Tap the left and right arro w buttons to m ove through each incident in turn, vie wing the details of each one.
Page 97
2. Tap 3. To hear a beep sound w hen a ne w traffic incident occurs on your route, select and then tap 4. If a faster route is found w hile you are driving, Traffic can replan your journey to use the faster route.
Page 98
Tap this button to change your settings for ho w the Traffic service w orks on your device. Tap this button to hear spoken information about traffic incidents on your route. Note : Your TomTom device must have a computer voice installed to read information aloud.
Page 99
W eath- The To m To m W eather service provides detailed w eather reports and 5-day w eather forecasts for to w ns and cities. The information is provided by local w eather stations and is updated hourly. To request a w eather report for a specific location, such as the to wn or city for your final destination, do the follo wing : 1.
Page 100
Tap this button to enter an address. Tap this button to select a location in a list of recently used destinations. Tap this button to select a location using a local search. Tap this button to select a Point of Interest (POI). Tap this button to select your current location.
Page 101
You are w arned in three w ays: • Your To m To m PRO plays a warning sound. • The type of speed cam era and your distance fro m the cam era location is sho w n in the Driving Vie w.
Page 102
To change the nu m ber of seconds or w arning sound, tap in the Speed Cam eras m enu. To change the w ay your To m To m PRO w arns you about speed cam eras, tap the button.
Page 103
Toll road cam era Restricted road ca m era - located on a minor road that reduces traffic on a larger road Other cam era M obile cam era hotspot A verage speed check A ccident black spot Bi-directional speed cam era Ungated railw ay crossing To sho w the report button in the Driving Vie w, do the follo wing : 1.
Page 104
Note: If the type of camera you choose has a speed restriction, you can also enter the speed. A m essage confirms that your cam era has been reported to the Speed Cam era team at To m To m. You do not need to be at the location of a speed cam era to report the ne w location.
Page 105
This type of cam era m onitors traffic at toll road barriers. This type of speed cam era checks the average speed of vehicles betw een tw o fixed points. This type of cam era checks traffic on roads w here access is restricted. All other types of cam era that do not fall into any of the above categories.
Page 106
O nce in the speed check zone, if you are driving at over 100% of the permitted speed and have not received a start of zone w arning, you see a visual w arning in the Driving Vie w indicating the maximu m permitted speed.
Page 107
To m M yTo m To m helps you manage the contents, maps and services of your To m To m PRO navigation device, as w ell as giving you access to the To m To m co m munity. It is a good idea to frequently connect your navigation device to M yTo m To m, to ensure you always have the latest updates.
Page 108
To do w nload content and services fro m To m To m, you need a M yTo m To m account. You can create an account w hen you start using M yTo m To m. Note: If you have more than one TomTom device, you need a separate account for each device.
Page 109
Cus- to m er sup- port You can find further online help at Tap this button to open the Status & information m enu. Tap this button to vie w technical information about your device, such as your serial nu m ber for your device and the To m To m A pp version. Tap this button to see the current status for GPS reception.
Page 110
A dden- du m The Global Positioning Syste m (GPS) is a satellite-based syste m that provides location and timing information around the globe. GPS is operated and controlled under the sole responsibility of the G overn m ent of the United States of A m erica which is responsible for its availability and accuracy.
Page 111
To m To m custo m er support. THE LITHIU M-POLY M ER B A TTERY C O N T AIN ED IN THE PRO D UCT M UST BE RECYCLED OR DISPO SED O F PROPERLY A CC ORDIN G T O THE LO C AL LA W S A N D RE G ULA TIO NS A N D ALW A YS SEPARA TE FRO M H O USEH OLD W A STE.
Page 112
20cm (8 inches) during normal operation. The To m To m PRO 71xx displays the C-tick to sho w it co m plies with relevant A ustralian and N e w Zealand regulations.
Page 115
For more information, visit tomtom.com/gpl or to call your local TomTom customer support team, visit tomtom.com/support and upon your request we will send you a CD with the corresponding source code.
Need help?
Do you have a question about the PRO and is the answer not in the manual?
Questions and answers