Alesis QuadraVerb 2 Setting Up page 5

Most Preset Programs route the LR IN signal to the LR OUT.When connecting to a
J
mixer's aux sends and returns. the Global Direct Signal Mute should be set to ON.
To remove all direct routings of inputs to outputs on all Programs simultaneously:
¿
Press [GLOBAL].
The [GLOBAL] LED will be lit.
¡
Press [< PAGE] once.
This selects Global Page 9. The display will read:
GLOBAL DIRECT SIGNAL MUTE:
OFF
¬
Turn the [VALUE/ENTER] knob to the right until the display reads "ON."
The next Program recalled which has the inputs routed to the outputs will not
display the patch cords for these connections nor will you hear any direct
uneffected signal at the outputs.
QuadraVerb 2 Reference Manual
Setting Up - Chapter 1
11