Specifications - Weldex WDAC-5700C Operation Manual

20
Problems
The WDR function is not working
Colors are not quite right.
The Day&Night function doesn't work
Digital BOX Camera Installation Guide
9 Specification
Model
Image Sensor
Total Pixels
Scanning system
Scanning Frequency
Sync. System
Resolution
Min. illumination
Video Output
S/N Ratio
Exposure
Lens
Gain Control
Shutter Speed
DWDR
Flickerless
Brightness
White Balance
BLC
BLC
HLC
Day&Night
Auto
BW
DPC
Special
Troubleshooting
Please check if the WDR Level is too low.
Please check if the AE Mode is set to MANUAL. The WDR doesn't work in MANUAL
Exposure mode.
Please check if the camera is facing directly into sunlight or fluorescent light.
Please check if an auto iris lens is being used.
Please check the connection of the lens connector cable.
Please check if the AGC of EXPOSURE menu is set to OFF.
The Auto Day&Night Function doesn't work in AGC OFF.
NTSC
1/3" SONY Super HAD CCD Ⅱ
811(H) × 508(V)
2:1 Interlace
15.734KHz(H),59.94Hz(V) 15.625KHz(H),50Hz(V)
Internal
Max 600 TV lines in color
(650TV lines in B/W)
Color : 0.1 lux , BW : 0.05 lux (0 lux @ IR LED on)
1.0 Vp-p (75 ohm, composite)
more than 50dB (AGC off)
Shutter/Brightness/AGC/DWDR
DC / VIDEO / MANUAL
Off / Low / Middle / High
1/60 ~ 1/100,000 sec 1/50 ~ 1/100,000 sec
Off / On (0 ~ 35 steps)
Off / On
0 ~ 255steps
ATW1 / ATW2 / AWC / Outdoor / Indoor / Manual
Off / BLC / HLC
Area / Gain selectable
All Day / Night / (0~255 steps)
Auto / Color / BW / Ext
Level / Delay selectable
Burst off/on / IR Smart off/on (Gain/level selectable)
Dead Pixels Compensation
Title / MD / PM / Parking / Image / Comm / Language / Version
Digital BOX Camera Installation Guide
PAL
795(H) x 596(V)
21