Table of Contents
Advertisement
Something Not Working
If the appliance is not working correctly, please carry out
the following checks before contacting your local Service
Force agent.
Symptom
The ignition does not work:
The burner does not ignite:
The flame has no uniform distribution:
The inner lamp is not working:
The oven is not warming up:
The display light is blinking:
IMPORTANT : If you call out an engineer to a
fault listed below, or to repair a fault caused
by incorrect use or installation, a charge will
be made even if the appliance is under
guarantee.
Solution
• The plug is not properly inserted in the power socket.
• There is no current at the socket.
• The gas is turned off.
• There is no ignition spark.
• The burner plate is improperly assembled.
• The burner is dirty.
• The plug is not properly inserted in the power socket.
• There is no current at the socket.
• The lamp is defective.
• The plug is not properly inserted in the power socket.
• There is no current at the socket.
• There has been a current interruption, the display needs to be
programmed again (see page 14).
26
Advertisement
Table of Contents
