Building In - John Lewis JLBIUCL 01 Instruction Manual

Building In

Before carrying out any work, remove the plug from
the power socket.
Grid preparation
Left door opening:
Remove the left side (A) of the grid cutting it from
the rear (see figure).
A
DO002/2
Right door opening:
Remove the right side (B) of the grid cutting it from
the rear (see figure).
To position the grid on the appliance proceed as
follows:
Apply the grid to the base of the appliance by
pushing on to the clasps (a) until they click.
a
DO001
B
a
Building in the appliance
under a worktop
The dimensions of the recessed installation area
must correspond with those indicated in the figure.
DO013
Installation kit
1. Two cabinet securing brackets are supplied with
the installation pack.They need to be assembled
onto the cabinet prior to cabinet being pushed
into the Kitchen aperture.
- To fit these brackets remove the two screws at
the top left and right hand front corners of the
cabinet.
- Position the two brackets as shown in the figure
and replace the two securing screws.
2
Left hand bracket Right hand bracket
9