programming your S.A.M.E. county codes
Use the
arrow to scroll through digits 0-9 to input the rst digit, which will should always be set to "0."
Press the
arrow to save each digit and advance to next digit for all 6.
Press
button to save the rst MULTIPLE Code.
Repeat steps to program up to 25 different county codes.
Press
button to save your S.A.M.E codes, then
note: The display will automatically revert to clock when no buttons are pressed for more than 55 seconds.
Helpful Tips:
The S.A.M.E. code is created using the following method:
• The first digit is the sub-county code, 0 in most areas.
• The second two digits represent the state code.
•The last three digits represent the county code.
3 times to exit.
sub-county code
two digit
(usually 0)
state code
(con't.)
three digit
county code