Programming Your S.a.m.e. County Codes; Customizing The S.a.m.e County Code Settings - capello CR2W User Manual

programming your S.A.M.E. county codes

In this section we will walk you through the steps for programming your local S.A.M.E. code(s).
For a step-by-step video describing this section, scan the QR code with your smartphone app
or visit www.hellocapello.com/weather-radio-video/#4
Your CR2W All Hazards Weather Alert Radio is preset to "ANY" to receive alerts and transmissions. If this is suf cient, leave the "COUNTY"
setting to "ANY." For more options, follow the menu selections:

Customizing the S.A.M.E County Code settings

Press button until "TIME" is displayed.
Press arrow until "COUNTY" is displayed.
Press button and choose "ANY" for codes within range, press
or press arrow to choose "SINGLE" or "MULTIPLE".
For "SINGLE" S.A.M.E. Code
When "SINGLE" is selected, press
Press button again to program your Single code. The rst digit space will start blinking.
Use the arrow to scroll through digits 0-9 to input the rst digit, which will should always be set to "0."
Press the arrow to save each digit and advance to next digit for all 6.
Press button to save your "Single" county code, then
For "MULTIPLE" S.A.M.E. Codes
When "MULTIPLE" is selected, press
Press button again to program your Multiple code. The rst digit space will start blinking.
button to display "SAME 01."
to exit.
button to display "SAME 01."
to save, then press to exit,