Turn Signal/Multifunction Lever; Turn And Lane-Change Signals - Chevrolet Malibu 2010 Owner's Manual

Hide thumbs Also See for Malibu 2010:
Table of Contents

Advertisement

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
operates the following:
G

: Turn and Lane-Change Signals

5 3
: Headlamp High/Low-Beam Changer
O
: Exterior Lamp Control
Flash-to-Pass.
Information for these features is on the pages following.
4-4
Turn and Lane-Change Signals
Move the lever all the way up or down to signal a turn.
Raise or lower the lever until the arrow starts to flash to
signal a lane change. Hold it there until lane change is
complete.
The lever returns to its starting position when it is
released.
If after signaling a turn or lane change the arrows flash
rapidly or do not come on, a signal bulb could be
burned out.
Have the bulbs replaced. If the bulb is not burned out,
check the fuse. See Fuses on page 6 105.
An arrow on the
instrument panel cluster
flashes in the direction of
the turn or lane change.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents