Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
•
Turn and Lane-Change Signals
•
Headlamp High/Low-Beam Changer
•
Flash-to-Pass Feature
•
Cruise Control
For information on exterior lamps, see Exterior Lamps
on page 3-12 .
3-6
Turn and Lane-Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the multifunction lever all the
way up or down. When the turn is finished, the lever will
return automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release it.
If you signal a turn or a lane change and the arrows
flash faster than normal, a signal bulb may be burned out.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you signal
a turn, check the fuses and check for burned-out
bulbs. See Fuses and Circuit Breakers on page 5-86 .
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.