Optical Parts Disassemblies - Sanyo PLC-SW10 Service Manual

Optical Parts Disassemblies

1. PROJECTION LENS REMOVAL
1) Remove the Cabinet top and cabinet front following to "Mechanical
Disassemblies".
2) Remove 4 screws and remove the Projection Lens.
2. OPTICAL UNIT TOP REMOVAL
1) Remove the Cabinet top, front, main board, component boards and power
unit cover following to "Mechanical Disassemblies".
2) Remove 6 screws and take the optical unit top off upward.
-14-
Fig.1
Optical Unit Top
Fig.2