Page 2
HDMI signal over a long distance without loss. Using the same electronics as the original HXC6IR but sacrificing CEC and IR control; the HX1C6 is able to send an uncompressed HDMI signal over 1 CAT6 cable. The HX1C6 will transfer Deep Color (12 bits/color) video and new lossless compressed (Dolby®...
• Supports one CAT-6 cable for data/DDC transmission • Equalization and recovery of incoming TMDS data signal prior to re-transmitting. • Supports xvYCC Color Space 3. Package Contents • HX1C6-TX Transmitter • HX1C6-RX Receiver • Two 5V/1Z universal DC Power Supplies • Operation manual...
TV/STD 8 Bit 12 Bit Switch to EDID to use the HX1C6 built-in EDID which supports PCM 2CH audio and 1080p 8-bit, 10-bit or 12-bit video. EDID selection will activate only after unit is unplugged and plugged back in. CAT6 OUT: Connect the CAT6 output of the transmitter to the CAT6 input of...
Need help?
Do you have a question about the HX1C6 and is the answer not in the manual?
Questions and answers