8. HDMI Electronics 2 Year Warranty ........... 7 1. Introduction The Tributaries HX1RG6 HDMI 1.3 Transmitter (Tx) and Receiver (Rx) over one RG6/U coaxial cable is a system designed to extend an HDMI signal over a long distance without loss. By converting HDMI to 3GSDI Tributaries HX1C6 is able to deliver Deep Color (12 bits/color) video and new lossless compressed (Dolby ®...
2. Features • Extends 1080p/12bit color up to 120 meters (393ft) over single RG6/U coax cable • Extends 1080i up to 150 meters (492ft) over single RG6/U coax cable • Compliant with HDMI 1.3c, HDCP 1.2 and DVI 1.1 standards. • Supports PCM L/R Audio, 5.1/7.1 Channel Surround/Digital Audio/DTS-HD • Supports equalization and recovery of incoming TMDS data before re- transmitting with optimal quality regardless of the incoming signal quality.
4. Operation Controls and Functions 4.1 Transmitter (Tx) Unit HDMI INPUT: Connect to the HDMI output of your source equipments such as a DVD player or Set-top-box with an HDMI cable. POWER INDICATOR LIGHT: illuminates when unit is plugged into 5VDC power supply DC 5V: Connect the 5V DC power supply to the HX1RG6.
Page 5
4.2 Receiver (Rx) Unit DC 5V: Connect the 5V DC power supply to the HX1RG6. Then connect the adaptor to an AC wall outlet INPUT: Connect the OUTPUT of the transmitter to the INPUT of the receiver using an RG6 cable terminated with 75 ohm BNC connectors. Note: Do not use BNC connectors that require screws or clamps to secure the connector to the cable.
This Warranty only applies to products purchased and used in the United States of America. Products purchased or used outside the United States are subject to such warranties, if any, as are provided by the Tributaries distributor in the respective countries.
Need help?
Do you have a question about the HDMI HX1RG6 and is the answer not in the manual?
Questions and answers