9. HDMI Electronics 2 Year Warranty ........... 1. Introduction The Tributaries HX1C6-LITE Transmitter (Tx) and Receiver (Rx) over a single CAT6 cable is a system designed to extend an uncompressed HDMI with 3D function signal and Bi-Directional IR up to 190ft without signal compression. By converting these signals to HDBaseT, Tributaries HX1C6-LITE is able to deliver Deep Color (16 bits/color) video and new lossless (Dolby®...
4. Operation Controls and Functions 4.1 Transmitter (TX) Unit Link LED: This LED will blink once it is connected to receiver via the CAT6 cable. The LED will stop blinking and stay illuminated to indicate successful HDMI transmission. Power LED: This LED indicator will illuminate when the 5VDC power supply is plugged into a wall outlet and connected to the transmitter.
Page 5
4.2 Receiver (RX) Unit Link LED: This LED will blink once it is connected to transmitter via the CAT6 cable. The LED will stop blinking and stay illuminated to indicate successful HDMI transmission. Power LED: This LED indicator will illuminate when the 5VDC power supply is plugged into a wall outlet and connected to the transmitter.
7. Connection and Installation Connect an HDMI cable between the HDMI output of the source device to the HDMI input of the Transmitter unit (5 meters max). Connect an HDMI cable between the HDMI input of the display device to the HDMI output of the Receiver unit (5 meters max).
Need help?
Do you have a question about the HX1C6-LITE and is the answer not in the manual?
Questions and answers