How To Run-In A New Chain - Oregon CHAINSAW Maintenance And Safety Manual

The life of your new chain can be extended by taking these few simple
steps before using it.
➊
Soak the chain overnight to allow oil to
penetrate all chain components.
➋
Never run any chain on a worn drive sprocket, especially a new
chain. Replace drive sprocket systems after every two chains, or
sooner.
➌
Run new chain at half throttle for several minutes before doing any
cutting in order to allow oil to reach all parts of the bar and chain.
Let sprocket, bar, and chain warm up fully.
➍
Stop, check chain tension, let chain cool, and adjust tension often
during operation, as shown on pages 13 and 15.
➎
Keep the first several cuts light.
Keep extra oil on the bar and chain during these first cuts,
and do not apply heavy pressure.
24.
SAW CHAIN

HOW TO RUN-IN A NEW CHAIN

SAW CHAIN SAW CHAIN