Prism Sound Orpheus Operation Manual page 21

Firewire audio interface
Hide thumbs Also See for Orpheus:
Table of Contents

Advertisement

Prism Sound Orpheus
Operation Manual
Revision 1.05
· You may need to enter an administrator's name and password. Click 'OK':
· The installation process will then complete:
· When software installation is complete, close the box and connect the Orpheus unit to the FireWire
port of the Mac.
The Orpheus device's ports should now be visible in Audio/MIDI Setup as Core Audio ports.
NOTE: Do not connect the Orpheus unit to the FireWire port of the Mac until software
installation is complete.
· Remember to register your Orpheus at http://www.prismsound.com.
OS X 10.4 Tiger patch
To ensure correct operation of Orpheus, users of OS X 10.4 Tiger must install a 'patch' before
following the Orpheus installation procedure. The patch is provided by Apple, but is not part of the
© 2008 Prism Media Products Ltd
1.15

Advertisement

Table of Contents
loading

Related Products for Prism Sound Orpheus

Table of Contents