Lincoln 2005 Town Car Owner's Manual page 126

• After about 20 seconds, the
message CHANNELS CLEARED
will appear on the display. Do not
hold for longer that 30 seconds.
HomeLink is now in the train
(or learning) mode and can be
programmed at any time
beginning with step 2 in the
"Programming" section.
Reprogramming a single HomeLink button
To program a device to HomeLink using a HomeLink button previously
trained, follow these steps:
1. Press and hold the desired
HomeLink button. DO NOT
release the button. The display will
read CHANNEL "X" (1,2 or 3)
TRANSMIT
2. The display will change to
CHANNEL "X" (1,2, or 3)
TRAINING after 20 seconds.
Without releasing the HomeLink
button, follow step 2 in the
"Programming" section.
For questions or comments, contact
HomeLink at www.homelink.com
or 1–800–355–3515.
2005 Town Car (tow)
Owners Guide (post-2002-fmt)
USA_English (fus)
Driver Controls
125