Scope Of Delivery; Safety Instructions - WAGNER DTS 5800 Original Operating Instructions

Steam wallpaper stripper
Hide thumbs Also See for DTS 5800:
Table of Contents

Advertisement

GB

Scope of delivery

1
Basic unit
2
Steam hose
3
Steam plate
4
Operating instructions

Safety instructions

Attention When working with hot steam (approx.100°), there is a risk of serious
scalding.
If you change position during use, be very careful because the steam unit,
hose and plate can be very hot.
Always wear suitable protective clothing / gloves.
Operate the unit only with pure water without agents or additives. Do not
switch the unit on when it is not filled with water.
Never point the steam plate / bar at people, animals or at objects sensitive to
temperature.
Always ensure that the unit is standing securely in a horizontal position (on the
floor).
Do not stand on or place objects onto the unit or steam hose. Never over-twist or make
kinks in the steam hose, and never block the valve. Only carry the unit by its handle – and
in particular, never pull on the steam hose or mains cable.
Never submerge the unit in liquid. Every time the accessory is changed for, when filling /
refilling and emptying or when the steam unit is not in use (including work pauses), pull
the mains plug out of the socket. Never overfill the unit. Unplug the mains plug in the
event of overfilling or a fault.
Do not use the device near combustible liquids and vapors.
Use only WAGNER original spare parts and accessories!
Caution! Danger of short-circuits! Cover sockets and switches and do not subject them
to steam.
Before connecting to the mains supply, be sure that the supply voltage is identical with the
value given on the rating plate.
When using an extension cable: max.10m long – the cable cross section must be at least 3 x 1 mm
Avoid damage! When working in the vicinity of wood / gypsum bases and coated materials
these can be impaired by heat or steam. Remedy: Use a heat / steam shield made of
cardboard or metal. The unit switches off automatically in case of overheating. After
approx.12 minutes, the unit switches itself back on automatically.
The steam time is approximately 120 minutes. Never leave a unit unattended that is on.
Keep the unit away from children and animals. Never let the container steam until it is
completely empty.
Before loosening the screw connections always allow the unit cool down
for at least 2 minutes. Caution! Risk of scalding!
Heated water can leak from the steam plate during the heating-up phase. Hot
water can drip during overhead work.
6
1
DTS 5800
2
4
3
Dampf-Tapetenablöser
2 Jahre
Steam wallpaper stripper
Garantie
Décolleuse du papier peint
2 years
Guarantee
Behangafstoom-apparaat
2 ans de
garantie
DTS 5800
2 jaar
garantie
D / GB/ F/ NL
.
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents