Lenovo 8200 Series Installation Manual page 96

Table 14 lists miscellaneous Windows diagnostics commands.
Table 14. Windows QConvergeConsole CLI—Miscellaneous Commands
Command
qaucli -v
qaucli -h
Table 15 lists the Windows CLI diagnostic test commands. Note that while running these tests, network
traffic is interrupted.
Table 15. Windows QConvergeConsole CLI—Diagnostic Test Commands
Command
-i
--interface
-a
--all
-D
--default
-R
--CRegs
-I
--IRQS
-L
--IntLB
-H
--Hw
-S
--LinkST
-nR
--noCRegs
-nl
--noIRQS
-nL
--noIntLP
-nH
--noHw
-nS
--noLinkSt
-h
--help
8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter
Description
Print version number, and then exit
Print usage, and then exit
Description
Specifies the interface type (NX_NIC, NX_NIC1,
and so on)
Perform all tests, regardless of default
Perform only the default test
Test all control registers (default)
Test interrupt mechanism (default)
Internal loopback test (default)
Hardware test (default)
Link status test (default)
No control registers test (combine –D or –a)
No interrupt test (combine –D or –a)
No internal loopback test (combine –D or –a)
No hardware test (combine –D or –a)
No link status test (combine –D or –a)
View help text
78
Page