Updating The Flash; Using The Vcenter Plug-In On A Tomcat Server; Installing Tomcat On Linux - Lenovo 8200 Series Installation Manual

Updating the Flash

Note: For ESX systems, before you perform a Flash update on a QLogic Adapter using the vCenter
Plug-in, ensure that the QLflash utility is also installed. Follow the instructions in the Installing
the Flash Utility section.
To update the Flash from the QLogic Adapter vCenter Plug-in:
1. Follow the instructions in "Starting the QLogic Adapter vCenter Plug-in" on page 12 to start the vCenter
plug-in.
2. In the left pane of the QLogic Adapter page, select the adapter, and then click the Update Adapter
Flash Image link.
3. In the Select Flash File for Update dialog box, click Browse.
4. In the Choose File to Upload dialog box, select the .bin Flash file from the extracted Flash kit package
that is compatible with your adapter, and then click Open.
5. In the Select Flash File for Update dialog box, click Send.
6. Verify the current Flash version and file version, and then click OK to continue the update.
7. When asked "Do you want to reset the adapter to activate the firmware immediately after successful
update?," click OK if you want the new firmware to take effect immediately. Or, click Cancel to have the
new firmware take effect after the next system reboot.
8. Wait for the Flash update process to complete. Processing time depends on the network connection
and the system configuration. Do not interrupt the update process.
Caution: The Flash update may take up to 10 minutes to complete. Do not cancel the task or
reboot the server during this time. Doing so may corrupt the firmware on the
adapter.
9. In the Flash update successful completion message box, click OK.
10. If you clicked OK in step 7 on page 13, you can click Refresh to verify the new firmware version.
Otherwise, you must reboot the system for the new firmware to take effect.

Using the vCenter Plug-in on a Tomcat Server

VMware requires that all vCenter plug-ins are web-based applications hosted on a Tomcat Server, which
can be downloaded and installed on Linux and Windows systems. Here is a link to Tomcat:
http://tomcat.apache.org.
The QLogic vCenter Plug-in supports Tomcat 5, 6, and 7. The installer dynamically detects the Tomcat
version and installs accordingly.
This section provides the following procedures for using the vCenter Plug-in on a Tomcat Server:
• "Installing Tomcat on Linux" on page 13
• "Starting and Stopping Tomcat on Linux" on page 14
• "Installing Tomcat on Windows" on page 14
• "Starting and Stopping Tomcat on Windows" on page 14

Installing Tomcat on Linux

To install Tomcat on a Linux OS:
1. Go to the following URL:
http://tomcat.apache.org/download-55.cgi
8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter
13
Page