Lenovo 8200 Series Installation Manual page 82

When partitioning is enabled, the Adapter Properties page appears as shown in Figure 43.
Figure 43: Partition Enabled
5. Click OK to close the message box that displays the following information:
This change requires a reboot. Proceed?
6. Click OK to close the message box that displays the following information:
Please reboot the system now
7. Reboot the host server to make the changes take effect.
Change Personalities To change function types (personalities) as needed for your network:
1. From the Server Manager, select Diagnostics > Device Manager > Network Adapters.
2. Right-click the desired QLogic 10 Gigabit Ethernet CNA device to change the function type and
select Properties from the context menu.
8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter
64
Page