Chapter 4. Configuring Fcoe; Installing Fcoe; Installing Fcoe In Linux; Installing Fcoe In Esx - Lenovo 8200 Series Installation Manual

Chapter 4. Configuring FCoE

This section describes the driver and agent installation, configuration, operation, and troubleshooting of the
FCoE function of the 8200 Series Converged Network Adapters.

Installing FCoE

Installing FCoE in Linux

For information about packaging content, Linux OS support, supported features, driver deployment, driver
system parameters, boot from SAN, and firmware installation, refer to the FC-FCoE Driver Readme file
(Linux Fibre Channel Adapter and Converged Network Adapter Inbox Driver Update) on the QLogic Web
site http://driverdownloads.qlogic.com.

Installing FCoE in ESX

For information about packaging content, ESX OS support, creating the driver disk, installing the driver,
and removing the driver, refer to the Fibre Channel and Fibre Channel over Ethernet (FCoE) Driver for
VMware ESX/ESXi 4.0.x and 4.1 Readme file on the QLogic Web site http://driverdownloads.qlogic.com.

Installing FCoE in Windows

For information about packaging content, Windows OS support, creating the driver disk, installing the
driver, removing the driver, Storport and driver registry parameters, refer to the FCoE Driver Readme file
(Converged Network Adapter FCoE STOR Miniport Driver for Windows) on the QLogic Web site
http://driverdownloads.qlogic.com.

QLogic Adapter Parameters

Configuring QLogic Adapter Parameters with the QCC GUI

For information about configuring QLogic adapter parameters with the QCC GUI, refer to the
QConvergeConsole Help System: Managing Fibre Channel and FCoE Adapters and Ports for information.

Configuring QLogic Adapter Parameters with the Interactive QCC CLI

For information about configuring QLogic adapter parameters with the interactive QCC CLI, refer to the
QConvergeConsole CLI User's Guide on the QLogic Web site http://driverdownloads.qlogic.com.

Configuring QLogic Adapter Parameters with the Non-Interactive QCC CLI

For information about configuring QLogic adapter parameters with the non-interactive QCC CLI, refer to
the QConvergeConsole CLI User's Guide, "Fibre Channel Noninteractive Commands" section on the
QLogic Web site http://driverdownloads.qlogic.com.

Target Persistent Binding

Configuring Persistent Binding with the QCC GUI

For information about configuring target persistent binding, refer to QConvergeConsole Help System.

Configuring Persistent Binding with the Interactive QCC CLI

For information about configuring persistent binding with the interactive QCC CLI, refer to the
QConvergeConsole CLI User's Guide on the QLogic Web site http://driverdownloads.qlogic.com.
93
8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page