Quick Start Up Guide; How To Read Barcodes; The Different Usage Mode; The Different Reading Mode - Baracoda BaracodaPencil2 User Manual

Table of Contents

5 Quick Start up guide

In order to switch on the scanner please keep the trigger pressed for two seconds.

Proper scanning position

Start to read the barcode in the blank left space. Keep the scanner in contact with the barcode.

The scanner will emit a beep when the scan is successful.

Scanner can be used in two modes (see chapter 8.2 for more information):

Real Time mode (standard mode): Barcodes are transmitted in real time to the remote host

devices/terminals using Bluetooth wireless technology (with acknowledgment from the host to the

scanner) or, if the scanner is not connected, will memorise in the scanner and later automatically

uploaded to a remote device/terminal always using Bluetooth wireless technology (or Scanner can be

set to operate only when connected to the host).

Batch mode: Barcodes are always stored in the scanner. For security reasons the upload will not be

automatic (user will have the possibility to upload the barcodes in a text file or directly in keyboard

emulation)

BaracodaPencil 2 has two (2) reading modes. These modes can be changed through both the

BaracodaManager and the programming guide.

5.3.1

Simply press the trigger when you want to scan a barcode.

BaracodaPencil 2 User Guide

Sample Bar code

* 1 2 3 4 5 6 7 8 - *

Page 3/11

Table of Contents