Baracoda BaracodaPencil2 User Manual page 7

Bluetooth connectivity interface:
Single Blinks (e.g. *pause*pause*...)
Double fast Blinks (e.g. **pause**pause**...)
Barcode decoder interface:
One Single long Blink (green colour)
LED Blinking colour:
The led colour is Green
The Led Colour is Orange
Special cases:
LED blinks orange
Double fast Blinks Red
BaracodaPencil 2 User Guide
The scanner is ready to be connected
The scanner is connected
The scanner has just read and decoded a barcode
The Scanner is set in Real Time mode or in master
Mode
The Scanner is set in batch mode
The scanner was set in the mode "Real Time, no
bufferisation" and is not connected. In this particular
situation the trigger will not activate the beam:
impossible to read barcodes in this mode.
Battery level is low. Please recharge the battery
immediately.
© Baracoda 2006 Page 6/11