Kubota V3600-E3 Operator's Manual page 42

Model
Type
Number of cylinders
Bore and stroke
Total displacement
Combustion type
SAE NET Continuous kW / min
H.P. (SAEJ1349) (HP / min
SAE Standby kW / min
H.P. (SAEJ1349) (HP / min
Maximum bare speed
Order of firing
Direction of rotation
Injection pump
Injection pressure MPa
2
(kgf / cm , psi)
Injection timing (Before T.D.C.)
Compression ratio
Fuel
Lubricant (API classification)
Dimension
(length × width × height)
Dry weight
Starting system
Starting motor
Charging generator
Recommended battery capacity
A Specifications are subject to change without notice.
NOTE (FOR E3BG or T-E3BG type):
A Flywheel type is SAE clutch No.11-1/2, SAE clutch No.10 or its equivalent.
A Flywheel housing type is SAE No.3 or its equivalent.
A Governor drop is within 5%.
A Continuous will operate at the stated rating continuously and have a 10% overload capability for one hour in 12
hours.
A Standby will operate at the stated full rating for one hour in 12 hours. No overload capacity is specified for this rating.
mm (in.)
L(cu.in.)
-1
(rpm)
-1
(rpm))
-1
(rpm)
-1
(rpm))
-1
min (rpm)
Counter-clockwise (viewed from flywheel side)
mm (in.)
kg (lbs.)
V3600-T-E3BG
Vertical, water-cooled, 4-cycle diesel
4
98 × 120 (3.86 × 4.72)
3.620 (220.9)
Spherical type (E-TVCS)
39.2/1800 (52.5/1800)
32.1/1500 (43.0/1500)
43.1/1800 (57.8/1800)
35.3/1500 (47.3/1500)
1890
1-3-4-2
Bosch type mini pump
13.93 (142, 2020)
0.09 rad (5°)
21.8
Diesel fuel oil No.2-D
above CF grade
769 × 539 × 803
(30.28 × 21.22 × 31.61)
283 (624)
Cell starter (with air heater)
12V, 3.0kW
12V 540W
12V, 88AH
SPECIFICATIONS 31