Chapter 3 Upgrade Procedure - Secure Computing NETWORK INTERFACE CARDS Manual

Upgrade Procedure
To complete the upgrade procedure for the network interface cards on your
Webwasher appliance, proceed as follows:
1. Power down the appliance and unplug the power cord.
2. Open the appliance cover.
Note:
cedures when handling network interface cards.
3. Install the network interface card or cards on the appliance. To do this,
proceed according to the appliance model in question:
WW500
•
As always, observe the usual ESD (Electro Static Discharge) pro-
Insert the new network interface card in the free slot provided for this
purpose on the rear side of the appliance box.
The following diagram shows the rear panel of a WW500 appliance
box. On the right side of this panel, there are two free slots for in-
stalling additional devices. Use the upper slot to install the additional
network interface card:
Note, however, that the slot positions may vary according to the par-
ticular version of the appliance model in question.
For a complete description of the elements on the rear side of the
WW500 Appliance, see the
the Installation and Configuration Guide, Webwasher Appliances.
Chapter 3
Rear Side
subsection of section 2.1 in
3–1