Panasonic KX-TAW848 Installation Manual page 113

Notes
• During a long programming session, it is highly recommended that you periodically save the
system data to the SD Memory Card. If the PBX undergoes a sudden power failure or if the system
is reset for some reason, all the system data in RAM will be lost. However, if system data has been
saved to the SD Memory Card, it can be easily restored.
To save the system data to the SD Memory Card, (1) click the "SD Memory Backup" icon before
resetting the PBX or turning off the power, or (2) exit the KX-TAW848 Maintenance Console so that
the PBX automatically saves the system data.
• When programming PBX data which can be displayed on an analog proprietary telephone (APT)
(extension names, group names, System Speed Dialing names, etc.), it is possible to enter
characters which cannot be displayed.
Characters which can be displayed on an APT are shown below in the white cells.
• The PC will not perform any shutdown operation, or enter the power-saving system standby mode
while the KX-TAW848 Maintenance Console is connected to the PBX. To perform either of the
operations above, first close the connection to the PBX.
3.3 Installation of the PC Programming Software
The system menu appears. You may now begin
programming the PBX.
Installation Manual 113