Preparation - KPN E160 Quick Start Manual

Preparation

Requirements for the Computer
To use the KPN E60 HSDPA USB-Modem, the computer should meet the following requirements:
• USB Type A Receptacle, Compatible with USB . 0 High Speed.
• Operating System: Windows 000 SP4, Windows XP SP, Windows Vista.
• Apple Macintosh OS X 0.4 and 0.5 are also supported, but a separate Mac client needs to be downloaded
from http://www.kpn.com website.
• Your computer's hardware system should meet or exceed the recommended system requirements for the
installed version of OS.
• Resolution for the display: 800 × 600 or higher.
Getting Your KPN E160 HSDPA USB-Modem Ready
• Remove the cover from the USB-connector
• Remove the USIM/SIM card-holder from the KPN E60 HSDPA USB-Modem.
• Insert the USIM/SIM card into the card slot holder, according to the drawing.
• Insert the card slot holder back into the KPN E60 HSDPA USB-Modem.
Inserting the Micro-SD Memory-card (Optional)
Insert the Micro-SD card into the KPN E60 HSDPA USB-Modem, as shown in the following figure.
Note: Do not remove the Micro-SD card when it is being used. Removing the card during an operation
may damage the Micro-SD card as well as the device, and data stored on the card may be corrupted.
4