Getting To Know Your Kpn E60 Hsdpa Usb-Modem - KPN E160 Quick Start Manual

Getting to Know Your
KPN E60 HSDPA USB-Modem
The following figure shows the appearance of the KPN E60 HSDPA USB-Modem. It is only for your reference. The
actual product may differ.
 USB Interface
It connects the KPN E60
both supported.
 SIM/USIM Card Slot
It is where you insert the subscriber identity module/UMTS subscriber identity module
(SIM/USIM) card.
 Micro-SD Card Slot
It is where you insert the Micro Secure Digital Memory (Micro-SD) card
 External Antenna Jack
To this connector an (optional) external antenna can be connected to the KPN E60 HSDPA USB-Modem. (The
external antenna is an optional accessory).
 Strap Hole
It could connect your KPN E60 HSDPA-Modem to, for example, a key cord.
 Indicator LED
This multi-color-LED indicates the current status of the KPN E60 HSDPA USB-Modem, according to the table
below here.
LED indication
Off
Green x blinking
Green x blinking
Green Burning permanent
Dark Blue blinking
Dark Blue Burning permanent
Light Blue (Cyan) Burning permanent
HSDPA USB-Modem to a computer. USB .0 and USB .0 are
Meaning; status of the USB-Modem
The USB-Modem is switched OFF, or problem with the USB-port of the PC
USB-Modem is ON, wait for action
Attached to GPRS or EDGE network, standby
Connection active via GPRS of EDGE network
Attached to UMTS or HSDPA network, standby
Connection active via UMTS network
Connection active via HSDPA network
3
1
2
3
6 4
5