Table Of Contents - DataCard RP90 Plus E Hardware And Driver Installation Manual

Contents
Preparing for Installation ____________________________________________ 1
Packing lists ____________________________________________________ 1
Unpacking the RP90 Plus E Printer __________________________________ 2
Unpacking the Optional RL90 Laminator ______________________________ 2
Unpacking other options ___________________________________________ 2
Installing the Printer ________________________________________________ 2
Choosing a Location ______________________________________________ 2
Providing Adequate Printer Ventilation ________________________________ 3
Connecting the Optional RL90 Laminator ______________________________ 3
Installing the Card Stacker _________________________________________ 6
Connecting the Power Cord(s) ______________________________________ 7
Connecting the Data Cable _________________________________________ 8
Installing the Printer Driver___________________________________________ 9
Install using a USB connection ______________________________________ 9
About Network Installation_________________________________________ 18
Install using a Network connection __________________________________ 22
Installing the Status Monitor _______________________________________ 30
Sharing a Printer on a Network Connection ___________________________ 32
Removing the Printer Driver _______________________________________ 37
Removing the Status Monitor ______________________________________ 40
Updating the Printer Driver ________________________________________ 41
Regulatory Compliance_____________________________________________ 43
Notice for USA (FCC Notice)_______________________________________ 43
Notice for Canada _______________________________________________ 43
Safety ___________________________________________________________ 43
Safe Environment _______________________________________________ 43
Datacard® RP90 Plus E and RL90
Hardware and Driver Installation Manual iii