Mounting The Cameras - Home Guard CCTV Security Kit Instruction Manual

1.3

Mounting the cameras

Each Homeguard camera is supplied with a mounting kit for attaching it to a wall. Before you affix the camera in
position, please ensure the cable is of adequate length to reach the DVR.
To mount the camera on a wall or ceiling, follow these instructions:
1. Ensure the surface you want to mount the camera on is solid and can support the weight.
2. Accurately mark on the wall the position of the holes to be drilled.
3. Drill to the correct depth in the wall, as indicated by the plugs.
4. Insert plugs into the drilled holes.
5. If required, drill a hole in the centre to feed the camera cable through the wall. Note the cable can be routed
along the wall via the cut-out in the camera base.
6. Secure the camera to the wall using the provided screws.
To adjust the camera's position, loosen the screws at the base of the camera and the pivot point on the arm, as well
as the locking ring on the bracket. The camera is now free to be positioned at any angle. Once positioned, tighten
both screws and locking ring again.
storageoptions.com/support 9