Controls And Features - Ford Automobile User Manual

Instrumentation
stays on, you should check the coolant level inside the reservoir. For
instructions on adding coolant, see Engine coolant in the Maintenance
and care chapter.
Anti-theft system (if equipped)
Refer to Perimeter alarm system
(if equipped) and SecuriLock
THEFT
passive anti-theft system in the
Controls and features chapter.
Anti-lock brake system (ABS) (If equipped)
Momentarily illuminates when the
ignition is turned to the ON
ABS
position. If the light does not
illuminate momentarily at start up,
remains on or continues to flash, the
ABS needs to be serviced. With the ABS light on, the anti-lock brake
system is disabled and normal braking is still effective unless the brake
warning light also remains illuminated with the parking brake released.
Check transaxle
Illumination of this light indicates
that a problem has been detected
and shifting may be restricted. If
this lamp remains on, have your
vehicle serviced immediately.
Speed control (if equipped)
This light comes on when either the
CRUISE
SET/ACCEL or RESUME controls
are pressed. It turns off when the
speed control OFF control is pressed, the brake is applied or the ignition
is turned to the OFF position.
11