1. Manuals
  2. Brands
  3. Cello Manuals
  4. LCD TV
  5. C2698F
  6. User manual

Cello C2698F User Manual

Lcd digital colour tv
Hide thumbs
Table of Contents

Advertisement

Quick Links

LCD digital colour TV
C2698F
USER GUIDE

Advertisement

Table of Contents
loading

Related Manuals for Cello C2698F

Summary of Contents for Cello C2698F

  • Page 1 LCD digital colour TV C2698F USER GUIDE...

  • Page 2: Safety Is Important

    Introduction Thank you for purchasing this TV which has been designed and manufactured to give you many years of trouble free service. You may already be familiar with using a similar product but please take time to read these instructions which have been written to ensure you get the very best from your purchase.

  • Page 3: Table Of Contents

    Contents SAFETY INFORMATION Unit and Accessories Remote Control Aerial connection 10-15 Connecting external devices Common Interface slot Auto installation setup Source menu 18-25 Menu settings 26-28 Multimedia Operation 29-31 Recording Operation EPG menu 33-36 DVD Operation TROUBLE SHOOTING GUIDE TECHNICAL SPECIFICATIONS Wall mounting options...

  • Page 4: Safety Information

    SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE. Take note of the following safety information which appears on the back of the TV. CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER SCREWS, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
  • Page 5 I MPORTANT SAFETY INFORMATION (Continued) This unit has been produced according to all current safety regulations. The following safety tips should safeguard users against careless use and the dangers connected with such use. Although this appliance has been carefully manufactured and rigorously checked prior leaving the factory, as with all electrical appliances it is possible for problems to develop.

  • Page 6: Headphone Warning

    I MPORTANT SAFETY INFORMATION (continued) Liquids spilt into the unit can cause serious damage. Switch the set OFF and disconnect the mains power supply, then consult a qualified service person before attempting to use the unit again. Do NOT remove the safety covers. There are no useable or serviceable parts inside. You may invalidate the warranty.

  • Page 7: Unit And Accessories

    Unit and Accessories Insert disc according to the label next to the disc slot SWITCH: LED Indicator Switch: Power ON/OFF Remote Control Window(keep clear) The functions of the TV buttons are described below. Menu : Press to display the OSD menu, press again to exit the menu. Vol +/- : Press to adjust the volume.
  • Page 8 Unit and Accessories (continued) Batteries TV set Remote Control Power cable QUICK START Remote Guide USER GUIDE Warranty Card GUIDE Remote Guide Quick Start Guide Warranty Card User Guide...

  • Page 9: Remote Control

    Remote control Functions of remote control buttons Dependant on the model of theTV some keys will have no function Only used on TVs with Internet Player*. In this mode the remote does not control the TV. iViewer Press to control the TV again. If you have set the remote to work a Satellite receiver, the remote controls only the Satellite receiver and not the TV when...
  • Page 10 Remote control (continued) Dependant on the Model of the TV some keys will have no function *Dependant on Model Source Menu ATV (Analogue) DTV ( Freeview ) SD1 (red card)* Menu SD2 (green card)* Help TV Settings Scart 1 This displays a page that gives telephone Scart 2 Picture numbers for service.
  • Page 11 Remote control (continued) Dependant on the model of TV some keys will have no function *Dependant on Model iViewer HOLD TEXT...
  • Page 12 Remote control (continued) Installing Batteries in the Remote Control 1. Remove the battery compartment cover at the rear of the remote control by pushing the retaining clip forward and pulling up. 2. Install the supplied batteries, ensuring the polarity matches what is shown in the battery compartment.

  • Page 13: Aerial Connection

    Aerial connection USER GUIDE WARNING! ENSURE THE TV AND ALL ANCILLARY EQUIPMENT IS UNPLUGGED FROM THE MAINS BEFORE MAKING ANY CONNECTIONS! Connecting the TV Antenna Connect the TV antenna to the aerial socket with a 75 ohm co-axial plug. For best results use a high gain TV aerial, preferably roof or loft mounted.
  • Page 14 Connecting external devices (continued) Switch: Turn on/off the power supply Common Interface device Output to Audio amplifier Output to Audio amplifier TV Signal Satellite Box or Blue Ray DVD...
  • Page 15 Connecting external devices (continued) CONNECTIONS Name Function Description SWITCH Turn on/off the power supply AC POWER IN Connect to power supply Connect to USB device for multimedia HDMI1/2/3 Connect to the HDMI socket of your DVD or Satellite Box Connect to the PC VGA output to display PC graphics PC audio in PC audio input SCART...
  • Page 16 Connecting external devices (continued) PC connection As PCs are sometimes still supplied with a ‘conventional’ CRT monitor, you may need to adjust the display settings of your PCs graphics card, otherwise the pictures may not appear correctly. Switch on your PC (still with your original monitor connected) no w select the screen resolution, and select 60Hz refresh rate.

  • Page 17: Connecting Video Camera And Video Recorder

    Connecting external devices (continued) Connecting Video camera and Video recorder Video camera Connect the AV cable to the TV and to the video camera. Turn on both video camera and the TV. Select AV/CVBS source You can now see the playback picture from the video camera. Note: To connect the video camera using other cables, refer to the video camera instruction manual.

  • Page 18: Connecting An Audio System

    Connecting external devices (continued) Connecting an audio system You can supply the TV sound to the stereo system (A) with the Scart socket. Use a special scart cable SCART to RCA. (Please consult your hi-fi instructions for details). If you have a surround sound amplifier/decoder (B) Use the Scart cable or the special scart cable Scart to RCA.

  • Page 19: Common Interface Slot

    USER GUIDE Common Interface Slot USING YOUR COMMON INTERFACE SLOT Common Interface The Common Interface (CI) slot is designed to accept the Conditional Access Module (CAM) and Smart Card in order to view the pay TV programmes and additional services. Contact your Pay Per View TV service provider to get more information about the modules and subscriptions.

  • Page 20: Auto Installation Setup

    Auto installation setup Power On / Off the TV Power Switch On / Off Press the power switch to setting and the standby indicator will light red. To turn on the LCD TV Press the power button on the LCD TV or the button on the remote control, the standby indicator will light green.

  • Page 21: Menu Settings

    Bas c Use Menu Settings 1. Turn the TV on. 2. Press the MENU button on the Remote Control. 3. Use the buttons to navigate through the menu. 4. Press the EXIT button to exit the Menu. TV SETTINGS MENU Allows you to search channels and set up a variety of channel options.
  • Page 22 Application Menu Settings (continued) 1. TV SETTINGS menu Description Auto Scan Press OK button to enter the hint menu, and select the Country and Tune Type mode for the TV, then press OK button to start auto tuning. DTV Manual Tuning Press OK button to enter the DTV Manual Tuning menu, select a DTV channel, and press OK button to start searching.
  • Page 23 Menu Settings (continued) Programme Edit Press OK button to enter the Programme Edit menu as the following picture. Delete: Select a channel and press RED button to delete. Move: Select an ATV channel, and press YELLOW button, then you can use buttons to change the position of the programme, press YELLOW again to confirm the change.
  • Page 24 Menu Settings (continued) 2. PICTURE menu Description Picture Mode: Choose from Standard, Dynamic, User and Mild. Note: Contrast, Brightness, Color and sharpness are only available and can be adjusted in the User mode option in the Picture Mode Settings. Contrast: Controls the difference between the brightest and darkest regions of the picture. Brightness: Controls the overall brightness of the picture.
  • Page 25 Application Menu Settings (continued) 3. SOUND menu Description Sound Mode: Allows you to select among: Standard, Music, Movie, Sports and User. Treble(Can be adjusted when the sound mode is User): Controls the relative intensity of higher pitched sounds. Bass (Can be adjusted when the sound mode is set to User): Controls the relative intensity of lower pitched sounds.
  • Page 26 Menu Settings (continued) 4. EXTRAS menu Description Sleep Timer: Allows you to setup the sleep timer among: 10min, 20min, 30min, 60min, 90min, 120min,180min, 240min and off. PC Setup (PC mode only) : Press OK button to enter the submenu to adjust Horizontal / Vertical position, Size or Phase of the picture.
  • Page 27 Menu Settings (continued) 5. OPTIONS menu DVD Setup Restore Setting Description OSD Language: Allows you to select menu language. Audio Language (can be selected in DTV mode): Allows you to select audio language. Subtitle Language (can be selected in DTV mode): Allows you to select subtitle language. Menu Time Out: Allows you to setup the time of the menu display on the screen among: 5s, 10s, 15s, 20s, 25s, 30s, 35s, 40s.
  • Page 28 Menu Settings (continued) 6. LOCK menu Description Lock System: Turn on/off the Lock System function. Note: You should enter the code to operate the menu.(original code is 0000) Set Password: Set pin code. If the Pin code has been changed you must enter the present code.

  • Page 29: Multimedia Operation

    Multimedia Operation Basic Operation 1). Press the SOURCE button on the remote control to display the input source menu, select USB source by the buttons, and press OK button to enter the Multimedia menu seen below. SCART YPBPR HDMI1 HDMI2 HDMI3 Select 2).
  • Page 30 Multimedia Operation (continued) 1. Photo Photo viewing Press button to select the option on the menu, and press OK button to change. Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Music: Play/Pause the music. Playlist: Display the playlist on the screen and select the photo of your choice. Info: Display the information of the file.
  • Page 31 Multimedia Operation (continued) 3. Movie Play the movie Press button to select the option on the menu, and press OK button to change. Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Set A-B: Select and play the preferable part of the file by setting A and B at the beginning and end. Press OK button to cancel.

  • Page 32: Recording Operation

    Recording Operation PVR settings Press the MENU button, and select EXTRAS menu. 1). Schedule List Display the recorder shedule. 2). Recorded List INFO: Display the information of the programme you recorded. RED button: Delete the recording you select.
  • Page 33 Recording Operation (continued) 3). Timer Record Set the timer record The TV will record the programme automatically according to your settings. TITLE: Select the channel you want to record. MODE: Select the record mode. Start Time: Select the start recording time. End Time: Select the end recording time.
  • Page 34 Recording Operation (continued) 5) Start Recording Record and Time shift function buttons Recording: Press to start recording. PAUSE: Press to enter the timeshift mode, press again to play the recording. Stop: Press to stop recording or timeshift. B: To display the list of programmes scheduled for recording. A: To display the list of programmes already recorded on the USB.

  • Page 35: Epg Menu

    EPG menu Display the programme guide by pressing the GUIDE button. Press the BLUE button to highlight the top of the table in yellow, press the to select CHANNEL or TIME. Programme list by TIME Programme list by CHANNEL Press button to highlight the date, now Press the buttons to highlight the channel...

  • Page 36: Dvd Operation

    DVD Operation Turn on your TV then use the Source button on the remote control or the TV/AV button on the TV to select DVD mode. If there is no disc in the DVD player the screen will show “NO DISC”. Place a disc Insert a disc according to the instruction label next to the dvd insert slot.

  • Page 37: Dvd System Operation

    Digital Audio Disc 1. Compatible with Digital Audio discs 2. The player will search the disc directory automatically and display the contents on screen. 3. The player will then start to play the first track, of the selected directory. 4. To change directories use the direction buttons. DVD System Operation System operation will define the setting of the set;...

  • Page 38: Language Setup

    TV SYSTEM According to the Color system of your TV, select proper TV TYPE. PASSWORD The password option is initialized as locked. You cannot set the ratings limit or change the password. To enable these features you must unlock the Password. The default password is "0000". Using the button, move the highlight to "PASSWORD", press the button and enter "0000".

  • Page 39: Digital Setup

    4. DIGITAL SETUP The video setup options are illustrated below: - DYNAMIC RANGE: Use the / button to move the scroll and adjust the dynamic range. - DUAL MONO: Choose the mode of the audio output. - There are four modes: STEREO, MONO L, MONO R, MIX MONO.

  • Page 40: Trouble Shooting Guide

    USER GUIDE TROUBLE SHOOTING GUIDE To assist in locating possible faults use the help guide below. No Picture, no sound Check that the TV is correctly plugged in. Check that the TV is connected to a suitable power source. Check the electrical supply is turned on. No Picture Ensure that the TV is powered on.

  • Page 41: Technical Specifications

    TECHNICAL SPECIFICATIONS Specifications of the TV that you have just purchased may vary from the information in this table due to technical innovations. TV Specifications TV System PAL / BG / DK / I Audio System BG / DK / I Screensize 26”(Diagonal) Resolution...

  • Page 42: Wall Mounting

    Wall Mounting The stand must first be removed. Place the TV face down. Remove the four screws that secure the stand. Remove and store the stand and screws. Use four machine screws to mount the TV on the bracket. This unit is VESA-Compliant and designed to be wall mounted with a VESA- Compliant 200mm x 100 mm mounting kit.

Table of Contents