Table of Contents
Advertisement
The Installation Steps
The Installation Steps
Step 1: Read about the Installation
To operate a WLAN in infrastructure mode, you must install an
access point. In infrastructure mode, a wireless client sends and
receives information through one or more access points.
The Steps Outlined
Step 2: Attach regulatory compliance labels.
Step 3: Install the hardware for the Intel® PRO/Wireless
2011B LAN Access Point.
Step 4: Access the main menu for the access point software.
Step 5: View and alter the settings in the Main Menu.
For steps 2 through 5, read the subsection entitled "Before You
Start." Failure to read this subsection could result in the adapter
not functioning in the network.
Step 2: Attach the Regulatory Compliance Label
A sheet of peel and stick regulatory compliance labels are
shipped with the adapter. Follow the directions on the sheet and
affix the appropriate label to the adapter.
Step 3: Install the Hardware
Before You Start
In this step, install the access point. If the access point is
already installed, skip this step and proceed to step 2.
Installation Requirements
The location of each access point must be:
•
Dry and dust free. Install in wet or dusty areas only with
additional protection.
•
Between 0° C (32° F) and 55° C (130° F).
Intel® PRO/Wireless 2011B LAN Access Point Quick Installation Guide
3
Advertisement
Table of Contents
